Home » Category » Tents & Shelters » Single-Skin Shelters » X1 Strike
X1 Strike
Buy Now
£799 / €935

The X1 Strike is a single-skin tent using our X-tex fabric. This uses a coating technology with activated carbon and introduces a new and quite revolutionary means of managing condensation which is greatly superior to conventional breathable membranes. To read more about X-tex, click here

It is built around the same diagonal 2-pole, external pole-sleeve configuration as the X1 Raid, but features a third internal pole to create significantly more space at the head of the tent. This allows for easier entry/exit from the tent, and yields a more vertical door that reduces the exposure of the inside to the elements.

Features 
Central roof vent
Mesh panel in door
Diagonal poles inserted through external pole sleeves
Third internal pole for extra headroom
Eight guy points
Two internal pockets
Supplied with 4 x 2 mm Dyneema guylines with mini-Linelok adjusters, 2 m length
Supplied with 6 x alloy pegs, 4 x titanium pegs

Colours

Red
Green
Black

Technical Specifications

People 2
Total weight 2010 g (complete)
Tent body 1345 g
Poles 485 g
Bags, pegs, guys 180 g
Flysheet Waterproof and breathable X-tex
132 g/m², 50 denier, polyester ripstop
20,000 mm hydrostatic head PU/activated carbon
25,000 g/m²/24hr MVTR
Groundsheet 70 g/m², 40 denier, nylon 6.6 ripstop
10,000 mm hydrostatic head TPU coating
Poles 3 x 8.50 mm Ø DAC Featherlite NSL
Guylines 4 x 2.00 mm Dyneema with mini-Linelok adjusters, 2 m length
Pegs 6 x DAC alloy V-pegs, 12 g each
4 x Titanium pegs, 7 g each
Packed size 45 cm x 15 cm Ø
Made In China

Dimensions

Inner length 210 cm
Inner width 120 cm
Inner height 100 cm

Buy Accessories

The following accessories are available for the X1 Strike:
X1 footprint
Replacement poles
Dyneema guys
Alloy pegs

Care & Maintenance

Storage
Always ensure the tent is completely dry after a trip before packing it away for any length of time. Tents can get stains and mildew if stored in a damp condition – and once these occur, they are almost impossible to remove.

Cleaning
The best way to clean your X1 Strike is simply to pitch the tent and wipe down with a cloth using a warm water and detergent mix. Never machine wash.

Groundsheet cleaning
Wipe down with a cloth using a warm water and detergent mix. Never machine wash – this will cause the PU coating to delaminate.

Poles
Over time, the elastic cord inside the poles may lose its stretch. In this case, unscrew the pole foot at one end, untie the elastic and pull it through until there is sufficient tension. Retie it to the pole foot, cut off the excess elastic and screw the pole foot back in. Don't let go of the elastic or you will find yourself re-threading all the sections!