Home » Category » Spares & Components » Tent spares » Poles - 1st Gen X2 Storm
Poles - 1st Gen X2 Storm
Buy Now
£25

Replacement poles for the 1st generation of X2 Storm tents manufactured between 2002-05.
Each pole is £25.

Technical Specifications

These poles are DAC 9.0 mm Press-fit. They replace the original specifications which were either Easton or Yunan depending on whether they were first or second production run.

Diagonal poles (2x)

Description: Straight pole
Overall length: 3500 mm (excluding pole tips)
No. of sections: 10
Sections breakdown (mm): 305-360-360-360-360-360-360-360-360-310
Folded length: 40 cm
Colour: Grey

Front transverse pole (1x)

Description: Straight pole, but with slightly pre-curved sections
Overall length: 3210 mm (excluding pole tips)
No. of sections: 10
Sections breakdown (mm): 360-360-360-360-360-360-360-360-360-330
Folded length: 40 cm
Colour: Red

Rear transverse pole (1x)

Description: Straight pole, but with slightly pre-curved sections
Overall length: 2660 mm (excluding pole tips)
No. of sections: 8
Sections breakdown (mm): 380-380-380-380-380-380-380-380
Folded length: 40 cm
Colour: Black

Care & Attention

Poles require little or no maintenance, but there are two points one should be aware of.
1. Throwing a set of folded poles out so they all snap together may look impressive, but this can lead to damage at the ends and ultimately weaken the metal increasing the risk of a J-tear failure (refer to tent knowledge base).
2. Over time, the elastic cord holding all the poles together stretches, and the poles are not held together so tautly. There may come a point in time where the elastic needs to be shortened or replaced.