Storage
Always ensure your tent is completely dry after a trip before packing it away for any length of time. Both flysheets and inners can get stains and mildew if stored in a damp condition – and once these occur, they are almost impossible to remove.

Flysheet cleaning
The best way to clean your X3 Bunker is simply to pitch the tent and wipe down with a cloth using a warm water and detergent mix. Never machine wash.

Groundsheet cleaning
As with the flysheet, wipe down with a cloth using a warm water and detergent mix. Never machine wash – this will cause the PU coating to delaminate.

Poles
Over time, the elastic cord inside the poles may lose its stretch. In this case, unscrew the pole foot at one end, untie the elastic and pull it through until there is sufficient tension. Retie it to the pole foot, cut off the excess elastic and screw the pole foot back in. Don't let go of the elastic or you will find yourself re-threading all the sections!

Flysheet seams
Very occasionally, insufficient tension in the stitching may mean that some water can seep through tent seams. The area around the vent panels is the most susceptible to this, for the reason that sewing three panels together is more difficult that sewing a straight seam joining just two panels.
Any such water seepage can be easily rectified by applying seam-sealant.
Before you ask: we can’t tape the seams of our X2 tents because they are silicon-coated on both sides, and tape just doesn’t stick properly.